Start page   E-mail   NTS Russian site   NTS Russian site   NTS italiano About Supply Support

 PRODUCTS
  Diagnostic equipment
   Scanner Tester DST-14T
 
   Scanner Tester DST-12 (arch)
 
   Motor-Tester MT10KM
 
   Scanner MT10SOM
 
   Diagnostic cables
 
 SOFTWARE - download
  MT10 software
 
  DST-14 software
 
  DST-12 software
 
 DOCUMENTATION
 
   User's manuals
 
   Diagnosing systems (xls)
 
 PRICE LIST
   Price list
 
 

Diagnostic Scanner-Tester DST-12 (archive)

DST-10, DST-12, DST-14 are no longer into production. DST-14T is actual analog with advanced features

DST-12 Description

Diagnostic Scaner Tester DST-12 DST-12 diagnostic scanner-tester is used for identifying and correcting troubles in vehicle electronic systems: electronic fuel injection, ABS, immobilizer, climate system, heater, etc.

DST-12 may be used to diagnose electronic control systems of VAZ, GM-AVTOVAZ, SEAZ/KAMAZ, VAG (Audi, VW, Skoda, Seat), Daewoo, Daewoo/Chevrolet, Kia, Opel, Renault, Peugeot, Fiat, Citroen, Hyundai, Ford, BAW, Chery, Great Wall, Suzuki, Toyota, Lexus etc.

DST-12 works by the stored software control. User should choose the program according to the vehicle model tested, for example the program VAZ-IZH-ZAZ, the program GAZ-UAZ-OBD II and others.

The 16 mB memory size of DST-12 diagnostic scanner-tester allow to keep up to 16 programs for different vehicle group types. DST-12 includes all existing programs at the production date.

The list of supported ECUs depends on the firmware installed and may expand as new ECUs are added. The latest list can be found in Electronic systems diagnosed with NTS Ltd equipment tables supplied with technical documentation or at our company site: www.nppnts.com.

Since different ECUs use different software versions, this tester was designed to support as much parameters and functions as possible Because of this, some ECUs do not support certain functions and respond negatively to tester requests.

Diagnostic equipment made by NTS Ltd. is not a dealer equipment for diagnosing ECUs in foreign-made and a number of Russian-made cars.
Nonetheless, these cars can still be diagnosed since NTS Ltd. equipments features most of the major functions you can find in the equipment produced by leading western firms.

Correct diagnostic results are only possible if you observe the requirements in vehicle manufacturer's documentation.
Unthinking usage of this tester functions may cause the electronic equipment of your car to fail!

Operation Mode

DST-12 scanner supports the following modes of operation:
PARAMETERS: In this regime you can monitor all the data (parameters) collected by the DST-12.
ACTUATOR: This regime provides control of actuators and some parameters of the engine. When you enter this regime you will see the list of all available actuators.
DATA COLLECTION: Here you are setting the data collection options, and then gather the data.
DT CODES (Diagnostic Trouble Codes): Lets examine trouble codes if any malfunction occurs.
MISC. TESTS (Miscellaneous Tests): Indicates start engine parameters (average battery voltage, engine RPM), provides two ways of resetting the ECU, CO adjust-ment, change engine start parameters. The tests list depends of ECU type.
LINK TO PC: This regime provides data exchange between the DST-12 and IBM PC (or compatible). The communication can be provided through the K-Line interface, then you need the Interface Adaptor (optional), or through the RS232C interface without the adapter.
SETUP. Lets select the desired interface language, ECU type, menu control mode etc. The chosen options are stored in the tester memory after power-down.
HELP: The help is accessible from any operation mode.

DST-12 makes possible to operate with different parameters (depends on the type of ECU) of electronic fuel injection system.

Packing list

DST-12 diagnostic scanner-tester
Identification
Consumer packaging
CD with documentation

Note: electronic versions of DST-12 Instruction Manual and Appendix to the Instruction Manual can be found in the Manuals catalogue of DST-12 Tester folder on the supplied with DST-12 CD.

Optional accessories (ordered separately):

DLC cable SO4-D12-DIAG extension cable for all vehicle models
Vehicle adapter OBDII AM4-D44-OBDII for OBD II equipped vehicles
Vehicle adapter GAZ AM4-D22-GAZ for GAZ and UAZ vehicles
Vehicle adapter Steyr AM4-D62-Steyr for vehicles eqquiped with VDO Steyr ECU (GAZ-560)
Vehcile adapter VAG-4 AM4-D52-VAG for VAG vehicles Audi, VW, Skoda, Seat models manufactured before 1994
SO4-D41-GAZ ABS cable for connecting to GAZ vehicles ABS
SO4-D21-VAZ cable for VAZ, Izh and DAEWOO vehicles equipped with 12-pin diagnostic connector (GM)
Power cable SO4-D32-VAZ BATT used together with SO4-D21-VAZ cable
Vehicle adapter VAZ/GM-12 AM4-D32-VAZ for VAZ vehicles with power supply from the diagnostic connector
DST-12-PK kit for updating tester software using a PC

DST-12/NK1 kit Packing list

DST-12 diagnostic scanner-tester
Vehicle adapter GAZ AM4-D22-GAZ for GAZ and UAZ vehicles
Vehicle adapter OBD II AM4-D44-OBD II for OBD II equipped vehicles
Vehicle adapter VAG-4 AM4-D52-VAG for VAG vehicles Audi, VW, Skoda, Seat models manufactured before 1994
SO4-D21-VAZ cable for VAZ, Izh and DAEWOO vehicles equipped with 12-pin diagnostic connector (GM)
SO4-D32-VAZ BATT power cable is used together with SO4-D21-VAZ cable
DLC cable SO4-D12-DIAG extension cable for all vehicle models
DST-12-PK kit for updating tester software using a PC
Consumer packaging
CD with documentation

Specifications
of Diagnostic Scanner DST-12

Max. allowable power supply voltage DC, V 30
Min. allowable power supply voltage DC, V 6,5
Consumed power, max. VA 2,5
Supported communications interfaces: K-Line, L-Line, RS-232, J1850 PWM/VPW; CAN: ISO11898 (High speed), ISO11519 (Fault tolerant), J2411 (Single wire).
Dimensions, mm 205x100x37
Max. weight, kg 0,35
Service life, years 5
Interface languages: Russian, English.


Info

User/s manuals (3)

Request price via E-mail E-mail

 © «NTS»Ltd.   Samara, Russia    Telephone/Fax: +7 (846) 269-50-20 (multi channel)    www.nppnts.com